約 6,576,708 件
https://w.atwiki.jp/mgnrc/pages/25.html
Wheel T1 Wheel T2 Wheel T3 Wheel T4 Wheel T5 Wheel T6 Wheel T7 Wheel T8 Wheel T9 Wheel T10 Wheel TX-1 Wheel T1 Health 210 Free 0 0 CPU Load 20 pFLOP Robot Ranking 20 Heal Rate 1.00 Resistivity 32 % Barrier Protection 20 % Mass 200.0 kg MaxSpeed Light 95 mph Light W.Thrusters 126 mph Heavy 62 mph MassPer Wheel Optimum 90 kG Max 373 kG Acceleration 6.0 ms2 DiminishingReturns Start 6 wheels End 12 wheels Overclocked Max Speed 278 mph Wheel T2 Health 395 265 20 12 CPU Load 21 pFLOP Robot Ranking 57 Heal Rate 1.00 Resistivity 32 % Barrier Protection 22 % Mass 244.0 kg MaxSpeed Light 96 mph Light W.Thrusters 128 mph Heavy 62 mph MassPer Wheel Optimum 142 kG Max 421 kG Acceleration 6.2 ms2 DiminishingReturns Start 6 wheels End 12 wheels Overclocked Max Speed 281 mph Wheel T3 Health 712 685 35 17 CPU Load 22 pFLOP Robot Ranking 160 Heal Rate 1.00 Resistivity 32 % Barrier Protection 24 % Mass 289.0 kg MaxSpeed Light 97 mph Light W.Thrusters 129 mph Heavy 63 mph MassPer Wheel Optimum 163 kG Max 644 kG Acceleration 6.3 ms2 DiminishingReturns Start 6 wheels End 12 wheels Overclocked Max Speed 284 mph Wheel T4 Health 1,235 1,550 50 23 CPU Load 23 pFLOP Robot Ranking 453 Heal Rate 1.00 Resistivity 32 % Barrier Protection 27 % Mass 333.0 kg MaxSpeed Light 98 mph Light W.Thrusters 130 mph Heavy 64 mph MassPer Wheel Optimum 184 kG Max 916 kG Acceleration 6.5 ms2 DiminishingReturns Start 6 wheels End 12 wheels Overclocked Max Speed 287 mph Wheel T5 Health 2,050 3,385 75 30 CPU Load 24 pFLOP Robot Ranking 1,275 Heal Rate 1.00 Resistivity 32 % Barrier Protection 29 % Mass 378.0 kg MaxSpeed Light 99 mph Light W.Thrusters 132 mph Heavy 64 mph MassPer Wheel Optimum 208 kG Max 988 kG Acceleration 6.7 ms2 DiminishingReturns Start 6 wheels End 12 wheels Overclocked Max Speed 290 mph Wheel T6 Health 3,255 6,685 115 37 CPU Load 25 pFLOP Robot Ranking 3,587 Heal Rate 1.00 Resistivity 32 % Barrier Protection 31 % Mass 422.0 kg MaxSpeed Light 100 mph Light W.Thrusters 133 mph Heavy 65 mph MassPer Wheel Optimum 231 kG Max 1,053 kG Acceleration 6.9 ms2 DiminishingReturns Start 6 wheels End 12 wheels Overclocked Max Speed 293 mph Wheel T7 Health 4,932 12,435 180 46 CPU Load 26 pFLOP Robot Ranking 10,073 Heal Rate 1.00 Resistivity 32 % Barrier Protection 33 % Mass 467.0 kg MaxSpeed Light 101 mph Light W.Thrusters 134 mph Heavy 66 mph MassPer Wheel Optimum 252 kG Max 1,110 kG Acceleration 7.1 ms2 DiminishingReturns Start 6 wheels End 12 wheels Overclocked Max Speed 296 mph Wheel T8 Health 7,113 24,195 300 58 CPU Load 27 pFLOP Robot Ranking 28,243 Heal Rate 1.00 Resistivity 32 % Barrier Protection 36 % Mass 511.0 kg MaxSpeed Light 102 mph Light W.Thrusters 136 mph Heavy 66 mph MassPer Wheel Optimum 276 kG Max 1,163 kG Acceleration 7.3 ms2 DiminishingReturns Start 6 wheels End 12 wheels Overclocked Max Speed 298 mph Wheel T9 Health 9,741 43,070 500 72 CPU Load 28 pFLOP Robot Ranking 79,080 Heal Rate 1.00 Resistivity 32 % Barrier Protection 38 % Mass 556.0 kg MaxSpeed Light 103 mph Light W.Thrusters 137 mph Heavy 67 mph MassPer Wheel Optimum 300 kG Max 1,209 kG Acceleration 7.5 ms2 DiminishingReturns Start 6 wheels End 12 wheels Overclocked Max Speed 301 mph Wheel T10 Health 12,633 78,560 825 88 CPU Load 29 pFLOP Robot Ranking 221,142 Heal Rate 1.00 Resistivity 32 % Barrier Protection 40 % Mass 600.0 kg MaxSpeed Light 104 mph Light W.Thrusters 138 mph Heavy 68 mph MassPer Wheel Optimum 336 kG Max 1,255 kG Acceleration 7.7 ms2 DiminishingReturns Start 6 wheels End 12 wheels Overclocked Max Speed 304 mph Wheel TX-1 Health 31,082 826,210 2,150 505 CPU Load 200 pFLOP Robot Ranking 11,118,120 Heal Rate 1.00 Resistivity 32 % Barrier Protection 60 % Mass 11,150.0 kg MaxSpeed Light 125 mph Light W.Thrusters 166 mph Heavy 81 mph MassPer Wheel Optimum 2,544 kG Max 14,063 kG Acceleration 8.5 ms2 DiminishingReturns Start 6 wheels End 12 wheels Overclocked Max Speed 366 mph
https://w.atwiki.jp/tbparanoia/pages/28.html
Wheel Ballのススメ Wheel Ball フリーソフト Kamigaki氏 2007/06/30 ver2.00 Kamigaki Web 2010/07/20 林檎の木：Wheel Ball トラックボールでボールを擬似的なホイールとして使えるようにするソフト 2010/07/30 窓の杜：ホイールのないトラックボールで擬似的なホイール操作を実現「Wheel Ball」 紹介：スクロール機構のあるトラックボールでも試す価値あり。世界が変わるぞ。 ELECOM M-DT2DRBK(以下DEFT)での使用について書いてみよう。 DEFTは多機能モデルであり、スクロールホイールが実装されている。「機能」という観点からは、Wheel Ballを導入する必要がない。しかし、DEFTに「Wheel Ball」を導入すると、操作性が向上するのだ。それだけではない。DEFTに対する見方、トラックボールに対する見方が変わるのだ。まさに、世界が変わったという心持ちになる。どういうことなのかと言うと。 ・ホイール操作から解放されて親指の負担が軽くなる (操作性の向上) ・スクロールを通じて、ボール操作に悦びを感じるようになる (世界が変わる) つまり、ボール操作を行う機会が多くなるのだ。ボール操作とは何か。そうせんやきさんは「ボールを転がす行為が癒しの効果を」と言い、三猫さんは「トラックボールは操作するのがとっても気持ちよい」と言っている。トラックボールの本質は「転がす悦び」にあり、Wheel Ballはその"悦び"を引き出す物なのではないか、と。 デフォルト設定画面 操作方法＆初期設定 操作方法： 右ボタンを押下している状態でボールを転がすとスクロールする。(スクロールモード) 右ボタンの押下を放すとスクロールモードが解除される。(通常モード) 設定でスクロールモードを固定する事もできる。 スクロール速度： 「垂直ホイール」タブで上方向/下方向の速度をMAX(右端)にして試してみる。 速すぎると思ったらちょこっと左にずらして再度試してみる。 この繰り返しで自分にとって快適な速度を模索するのがオススメ。 水平ホイール： 「水平ホイール」を使用すると、スクロールがブレブレになる場合がある。 そんな時は「垂直・水平ホイール同時使用制限」の「固定方式」にすると良い。(「林檎の木」のレビュー参照) スクロール機構付トラックボールでは： Wheel Ballの試用をオススメ。 試しに導入して、指にかかる負荷や疲労感を比べてみよう。 Nadesath Nadesath フリーソフト umafoo氏 2016/04/02 ver2.7 Vector：Nadesath 2.7 2010/11/04 窓の杜：画面のスクロール操作をトラックボールの回転で再現「Nadesath」 2011/01/19 Vector：Nadesath - 新着ソフトレビュー 紹介：「ソフト作者からひとこと」が詩的で素敵。 トラックボーラー（トラックボール使い）は、ボールをゴロゴロさせるのが大好きです。 例外なく、私もゴロゴロさせています。しかし、画面のスクロールはホイールを使うわけです。 しかし、トラックボーラーは、ゴロゴロさせてスクロールさせたいわけです。 「Wheel Ball」との相違： 1.現在開発中： 「Wheel Ball」の最終版は2007/06/30 ver2.00。公式ページ記載の動作環境は「 Windows Vista/XP/2000（x86）」 「Nadesath」の開発は現行進行形であり、Windows10対応のリリースが期待される。 2.デバイス毎の設定： 「Wheel Ball」の設定は全てのデバイスに影響を与えるが、「Nadesath」の設定は各デバイスへの個別設定となる。 例えばPCにExpert Mouse7とLogicool M570を接続している場合、 「Wheel Ball」はEM7とM570の両方に影響を与えるが、「Nadesath」はEM7とM570に対しそれぞれ個別の設定を行う。 3.他にも多機能： 「アプリ別スクロール設定」「ボタン割り当て変更」等、「Wheel Ball」にない機能が実装されている。 デフォルト設定画面 操作方法＆初設定 「デバイス設定」タブ 接続中のデバイス(マウスやトラックボール)が表示される。 カーソルを動かすとアクティブデバイスとしてピンク色に表示される。 それを選択し「デバイス設定(S)」ボタンを押すこと。 # 何も選択していない状態で「デバイス設定(S)」を押しても無反応となる。 Marble Mouse Scroll Wheel Marble Mouse Scroll Wheel フリーソフト simans.net.氏 2008/04/10 Version 0.99c web.archive.org：simans.net 寸評： ・本家サイトは消滅。残されたのは、保存されたArchaiveページのみ。 ・アイコンが素敵。Marble Mouseそのまま。 ・Scroll Buttonに設定できるのはM、X1、X2の3ボタンのみ。 ・Ver1.0リリース予定だったが実現されなかった模様。 デフォルト設定画面： marbleel marbleel フリーソフト EXCWSM氏 2015/11/05 業務日誌 寸評： ・超シンプル仕様。EXEファイルの大きさはわずか8.00 KB。 ・設定画面は存在せず。設定変更は、同梱の"marbleel.ini"に書き込んでEXEファイルを再起動。 ・Wheel button numberをEB=3として設定したら、右クリック押下でスクロール可能になった。 "marbleel.ini"のデフォルト値： ;; ;; Marbleel Configurations ;; ;; Mouse button number ;; 1 LEFT ;; 2 MIDDLE ;; 3 RIGHT ;; 4 X1 ;; 5 X2 ;; [0] USE=1 ;; [1] ;; Wheel button number EB=4 ;; (Vista or later) Enable Horizontal Wheel (default 1) ;HWHEEL=1 ;; (Vista or later) Vertical WHEEL_DELTA ;VW=60 ;; (Vista or later) Horizontal WHEEL_DELTA ;HW=60 ;; Vertical sensitivity ;VS=2 ;; Horizontal sensitivity ;HS=3 ;; ;; Alternate Button ;; A1S=1st source button number ;; A1D=1st destination button number ;; A2S=2nd source button number ;; A2D=2nd destination button number ;; ;; continue as far as exists ;; A1S=4 A1D=2 A2S=5 A2D=2 Windows10環境で既知の問題点 現象：スクロールしない、エラー表示で落ちる 詳細： Windows10は、Windows7のUIを継承している部分と、Windows10で新規に構築された部分で構成される。 後者の部分(WindowsストアアプリやタブレットUI)では動作しない。典型的な例としては、 ・Windowsキーで表示されるスタートメニュー - すべてのアプリでスクロールしない。 ・MicroSoft Edge （IE後継でタブレットUIのブラウザ）でスクロールしない等。 対象： [Wheel Ball2.00/Marble Mouse Scroll Wheel/marbleel] Windowsアップデートの状態によっては、上記がフリーズする時期があった。 2016年05月15日現在は「動作しない」という形で安定している。 Windowsアップデートは全て適用しておくこと。 [Nadesath2.7] 「動作しない」部分で操作するとエラー表示＋強制終了となる。 Nadesathの設計思想は制御不能時の「フリーズを回避」にあるようだ。 [MouseGestureL.ahk] 「動作しない」という形で安定している。
https://w.atwiki.jp/3-4freedom/pages/23.html
お気に入りのページを投稿していってくださぃ。 ちょびりっち http //www.chobirich.com/ お小遣い稼ぎサイトです。一応安全ですょ ちなみに3000円くらい稼いでます。 リヴリーアイランド http //www.livly.com/main.php PC内でペット飼って，まぁ話したりするサイトです。 ＧＫＭ別館 http //game.ryuhoku.jp/ タイセリオンを中心にオンラインゲームを手軽に遊べるサイトです。 もちろん無料ですから、遊び放題ですよ！ わいわい芸夢館 http //homepage3.nifty.com/shin3/ ゲーム攻略のサイトですが、上級者が集まるかなり有名なところです。 タイムアタックの動画とか見れます。すごすぎて笑ってしまいます。 脱出ゲーム大百科 http //www.no1game.net/ 脱出ゲームがかなりあるところです。もちろん無料！ 初めて方でもやった事がある人も楽しめるサイトです。 Gotmail.jp 脱出ゲーム http //www.gotmail.jp/game_top.html このサイトの脱出ゲームはむずいし、おもろいですよ♪ ライフカードのCM あの有名なライフカードのＣＭの続きです。 検索すればでますが一応載せときます http //www.lifecard-choice.com/top.html おもしろムービーズ 様々なフラッシュ、またはムービが置いてあるサイトです。 手軽でもちろん無料！ おすすめはＭ２の逆襲、超人類です！ http //hiroscience.alink.uic.to/ アニメモ ただでアニメの動画を見ることができます ただし説明をちゃんと読んでね http //animemo.blog54.fc2.com/blog-category-1.html
https://w.atwiki.jp/wakaidao/pages/11.html
http //www.chitose.ac.jp/ cist http //portal.mc.chitose.ac.jp/portal/top.jsf ptal http //www.alc.co.jp/ alk http //owl.nime.ac.jp/trac/portal/ trac https //neontetra.spub2.chitose.ac.jp/pm/wiki/ wiki http //www.cjapan.ne.jp/tdds インターネット学科学習システム 満点様 FLASH http //hfm-kenchan.com/Lesson/log_qa/D0603124.htm 【FlashQ A】attachMovieを使い時間差でインスタンスを順番に配置 http //www.saturn.dti.ne.jp/~npaka/flash/as20/eclipse.html eclipse連携 ActionScript 2.0メモ http //www.be-interactive.org/index.php BeInteractive! http //blog.cellfusion.jp/flash/actionscript20/ cellfusion blog | ActionScript2.0 http //www.cove.org/flade/ Flade - Flash Dynamics Engine http //oshige.com/flash/note/abcdefg/ Flash ActionScript2.0入門ノート A,B,C,D,E,F,G http //oshige.com/flash/note/hijklmn/ Flash ActionScript2.0入門ノート H,I,J,K,L,M,N http //oshige.com/flash/note/opqrstu/ Flash ActionScript2.0入門ノート O,P,Q,R,S,T,U http //oshige.com/flash/note/vwxyz/ Flash ActionScript2.0入門ノート V,W,X,Y,Z http //www.kikka.atnifty.com/ http //www.kikka.atnifty.com/ http //homepage2.nifty.com/icutommy/notebill/index.html NoteBill vol.1 Nov.8 http //homepage2.nifty.com/icutommy/notebill/01_mvc.html NoteBill vol.1 Nov.8 01 MVCって何やねん http //progression.libspark.org/trac Progression Framework http //sourceforge.net/project/downloading.php?group_id=90749 use_mirror=nchc filename=SEPY-ActionScript-Editor-1.5.3.6.exe 27371128 SEPY http //aoi-project.com/blog/2006/11/flashswf.html くじらぶろぐ Flashで複数swfに分割するときの注意 http //oshiete1.goo.ne.jp/qa1227796.html 教えて！goo ダイナミックテキストを回転させたい http //oshiete1.goo.ne.jp/qa2323307.html 教えて！goo フラッシュでjpg画像の背景を透過するにはどうすれば良いのか http //www.saturn.dti.ne.jp/~npaka/flash/as30/ ActionScript 3.0メモ http //koshiandoh.com/ こしあん堂 http //flashrave.org/as/xml/ XMLの読み込み （「firstChild」と「firstChild.nodeValue」、「nextSibling」） FLASHRAVE - FLASH 講座 - http //www.wdc.tera-house.ac.jp/past/2007/01_asDic/apm/index.php?id=c039 table=class pWord=%E3%82%AF%E3%83%A9%E3%82%B9 v_name= as_name= APM ActionScript リファレンス http //www.saturn.dti.ne.jp/~npaka/flash/as20/MouseEx/index.html Flashプログラミングメモ http //itpro.nikkeibp.co.jp/article/COLUMN/20060525/238975/?ST=swd-tech Flash 8 入門講座：ITpro http //www.project-nya.jp/modules/weblog/details.php?blog_id=622 にゃあプロジェクト - ウェブログ - MovieClipで衝突判定 (2) HTML http //htmllint.itc.keio.ac.jp/htmllint/htmllint.html Another HTML-lint gateway http //allabout.co.jp/internet/hpcreate/closeup/CU20070412A/ CSS Hackを使わずにIEのバグに対処する方法 - ［ホームページ作成］All About http //css.uka-p.com/ CSSレイアウト実践講座 http //css-happylife.com/log/css-template/000067.shtml dlのdt dd を横並びに｜CSS HappyLife http //validator.w3.org/ The W3C Markup Validation Service http //nucleus.datoka.jp/?itemid=6 UTF-8 とBOM (Byte Order Mark) - Nucleusだとか http //www.esrij.com/support/arcexplorer/document/ax_about_utf8n.html UTF-8Nについて http //jigsaw.w3.org/css-validator/ W3C CSS 検証サービス http //www.nextindex.net/web/tips/index.html#link What is HTML Documents? http //www.kanzaki.com/docs/html/htminfo12.html ハイパーリンク -- ごく簡単なHTMLの説明 http //heo.jp/tag/ みんなのタグ辞書/HTMLタグ辞書 JAVA http //homepage2.nifty.com/sak/w_sak3/doc/sysbrd/servlet_jsp_k07.htm JAVA Servlet、JSP 基礎編7 - フォームリクエスト、クエリーリクエスト、日本語 - SAK Streets http //www.viste.com/Java/Language/language3.html Java 型変換・キャスト http //www.javaroad.jp/bbs/answer.jsp?q_id=20051114211600525 Javaの道＞掲示板(JSPの初期表示のイベント発生について) http //www.geocities.jp/woodstock_tomo/programing/java/index.html Programing Note http //www.openspc2.org/JavaScript/Web_Standard/004/index.html Web標準化時代のJavaScript http //d.hatena.ne.jp/Strada/ あるSEの生態 ～ そこにバグがあるから http //madonnalily.blog49.fc2.com/blog-entry-29.html えらーだらけ。 http //www.thinkit.co.jp/free/article/0607/8/4/ JSF [ThinkIT] 第4回：環境設定 (1/3) http //dream.mods.jp/first_jsf/part1.html JSF入門 http //www.meibinlab.jp/nishijima/ ある技術者の備忘録 http //java.yubit.net/java_shoshinsha_100_100.html 【初心者】Java質問･相談スレッド100【大歓迎】 Java、Java資格関連 過去ログまとめサイト http //ylb.jp/2006b/proc/recursion/ 再帰呼出し http //www.sraoss.co.jp/PostgreSQL/7.3/install.html PostgreSQL7.3インストール編 JSF http //dream.mods.jp/first_jsf/part1.html JSF入門 http //muimi.com/j/jsf/shop/ JSFサンプルアプリケーション http //634.ayumu-baby.com/jsf/request.html 634 - サーバサイドJava - JSF(JavaServer Faces) - HttpServletRequestの取得 http //634.ayumu-baby.com/jsf/ 634 - サーバサイドJava - JSF(JavaServer Faces) LDAP http //homepage3.nifty.com/rio_i/lab/jldap/002connect.htm LDAP サーバに接続する http //muimi.com/j/ldap/ LDAPdでLDAPを使ってみる http //www.atmarkit.co.jp/fnetwork/rensai/ldap06/ldap1.html LDAPプログラミングの基本 http //bhd.staba.jp/ldap/olwin32.html OpenLDAP for win32 http //www5f.biglobe.ne.jp/~inachi/openldap/admin/index-ja.html OpenLDAP ソフトウェア 2.3 管理者ガイド http //infokeepers.net/network/ldap/index2.html openLDAP奮闘記 [設定編] http //www.tom.sfc.keio.ac.jp/~sakai/d/?date=20050911 ヒビルテ(2005-09-11) PERL http //pocketstudio.jp/win/activeperl/ ActivePerlのインストール方法 - Windowsでperlを使おう！ http //www.kent-web.com/perl/ Perl基礎入門 http //www.scopesd.jp/epic_svn.html SCOPE online - ECLIPSE+EPIC+SVN構築の記録 PHP http //blog.cles.jp/item/1434 EclipseでPHP http //www.koebi.net/index.php Koebi.net KoebiStudio HTML・PHP開発環境ソフトウェア http //masago.kir.jp/php20030814.php 離れPHP島 SERVER http //repository.kulib.kyoto-u.ac.jp/dspace-memo/freebsd.html DSpaceメモ(FreeBSDのインストール) http //www.ksknet.net/freebsd/ FreeBSD http //www.cs.reitaku-u.ac.jp/msemi/freebsd/Freebsd-manu3.pdf Freebsd-manu3.pdf (application/pdf オブジェクト) http //www.ongs.co.jp/publications/books/freebsd_bible/ftp_install.html FreeBSDビギナーズバイブル http //kamae1116.ddo.jp/ LinとWinで作る自宅サーバー http //fabrice.bellard.free.fr/qemu/ QEMU http //www.ksknet.net/freebsd/qmailvpopmailqm.html qmail+vpopmail+qmailadminのインストール手順(FreeBSD) http //www.vmware.com/download/player/ VMware Player http //www.futomi.com/lecture/apache/index.html WindowsでApacheサーバを立てよう - futomi's CGI Cafe http //hnw.dip.jp/nw/mode.html イーサネットの通信モード http //freebooks.info.nara-k.ac.jp/archive/FreeBSD_Install/index.html おうちで使うFreeBSDインストール入門 http //www.ponko2.com/ ぽんこつWEBサーバー構築 http //y-kit.jp/saba/ 自宅サーバーで行こう - Windows XP ADSL編 http //memo.blogdns.net/java3.html Apache Tomcat を動かす (Java 5編) http //www.higaitaisaku.com/hosts.html hostsファイルとは？ http //www.insnet.co.jp/homepage/technical/tomcat55/ Tomcat5 http //www.atmarkit.co.jp/bbs/phpBB/viewtopic.php?topic=33888 forum=6 0 apacheとtomcatの連携について - Windows Server Insider http //memo.blogdns.net/java3.html Apache Tomcat を動かす (Java 5編) http //d.hatena.ne.jp/ruzia/20070520/1179657404 QuickVPS上のDebian EtchでApache2.2とTomcat5.5を連携させようとしてはまる - 守破離 http //b.hatena.ne.jp/entry/3144938 はてなブックマーク - Apache Tomcat を動かす (Java 5編) http //d.hatena.ne.jp/seiunsky/20060716/1153079308 Apache2.2 + Tomcat5.0 を Linux環境で構築 - まさにっき（使えないプログラマーの記録） TOMCAT http //localhost 8080/manager/html tomc http //localhost 8080/portal/top.jsf ptal http //localhost 8080/sampleJsf/ sampleJsf http //localhost 8080/laboratory/login.jsf 研配 http //wakai.s3.zmx.jp/ wakaiDAOのページ http //www4.atpages.jp/wakai/ wakaiDAOのページ http //www.girlscity.jp/home/wakai/ wakaiDAOのページ UNIX http //tmcosmos.org/linux/centos/co5.html CentOS 5 インストール個人的ノート http //macwiki.sourceforge.jp/wiki/index.php/UNIX%E3%81%AE%E5%9F%BA%E6%9C%AC%E3%82%B3%E3%83%9E%E3%83%B3%E3%83%89#cp_.E2.80.A6.E3.83.95.E3.82.A1.E3.82.A4.E3.83.AB.E3.82.**UNIXコマンド http //www.k-tanaka.net/unix/ UNIXコマンド http //itpro.nikkeibp.co.jp/article/COLUMN/20060224/230577/?ST=oss Linuxコマンド集 INDEX(アルファベット順)：ITpro http //www.ksknet.net/vi/post_134.html コピー ペースト http //ryouto.jp/linux/linux_25.html それ行けLinux～PostgreSQL～ userbl http //www.mozilla-japan.org/support/firefox/edit#profile Firefoxbookmark http //www.atmarkit.co.jp/flinux/rensai/linuxtips/825usegparted.html Gnome Partition Editor http //way101.net/column/key.htm キーボードショートカット http //www.power2power.com/ ショートカットキー、プログラマー直伝。 便利で、早い処理ができます。 http //www.relief.jp/itnote/archives/001306.php ファイル名を指定して実行ダイアログから起動するプログラム一覧：Windows ウィンドウズの使い方 http //chienomi.com/ フリーソフト紹介サイト - 知恵の実.com - http //journal.mycom.co.jp/column/winxp/093/index.html ようこそ画面の未読メール http //www.atmarkit.co.jp/fjava/javatips/043eclipse016.html ＠IT：Java TIPS -- Eclipseで.warファイルを作成する http //localhost/sample/test/upload.php wakaiPhp http //www.techscore.com/tech/XML/ XML -TECHSCORE-
https://w.atwiki.jp/hiroaqisanada/pages/15.html
BOOK ☆art of building wheels The Bicycle Wheel (eq) weblog/カテゴリ/wheels F(P)GIOS,pisto from chiba ☆pantourhub 32H? OPENPRO 700c or DTswiss ディープリムじゃなくていいのかなー？ ラジアル組 F (p)GIOS,pisto from chiba ローラーブレーキ 36H? 700cの軽いリムで JIS組(ローラーブレーキ側逆方向) FR26インチに (p)pisto from chiba アルホンガブレーキぴったり 700c =ETROT622 650c =ETROT571 26inch =ETROT559 ETROT 622-571=51 ETROT 622-559=63 51/2=25.5 63/2=31.5 リーチ(min)：25.5+49=74.5 リーチ(max)：25.5+39=64.5 リーチ(min)：31.5+49=80.5 リーチ(max)：31.5+39=72.5 アルホンガ HJ-714AG ; 53-73mm cf SHIMANO ; BR-S030 FCrossed Lengths (p) 36H FR超軽量 (p)GIOS ARAYA ADX 28H AmericanClassic F2X , spoke DTリボリューション 1.8X1.5 ,Alloy nipple R3X , spoke DTリボリューション 1.8X1.5 ,Alloy nipple LINK 自転車のタイヤ寸法 スポーク長計算 スポーク長計算（詳細版） 変なホイール組み 遊輪館 名前 コメント トップヘ戻る（チャリ） アクセス解析
https://w.atwiki.jp/icon32/pages/6.html
2ch http //www.2ch.net/ デスクトップ板 http //pc8.2ch.net/desktop/ ～32bit アイコン総合スレ～13 http //pc11.2ch.net/test/read.cgi/desktop/1211980851/ viptop デスクトップ素材保管庫（有難屋のアイコンなど） http //www6.atwiki.jp/viptop/pages/21.html InterfaceLIFT http //interfacelift.com/ @icon変換 http //www.towofu.net/soft/aicon.php Browsing OS Icons on deviantART http //browse.deviantart.com/customization/icons/o... RESOURCE App Icons http //aoq.blog30.fc2.com/blog-category-12.html icon cube. http //iconcube.vis.ne.jp/
https://w.atwiki.jp/anthony/pages/36.html
Debian Wheezyのインストール前準備 以前から玄箱PROはDebian化して運用していたのですが、この度家庭内LAN上のLinkStationがHDD故障でトラブルに逢ったことが原因で、色々と整理を始めていました。 いつも分からないコマンドがあるとネットで調べていたのですが、色々なところに書いてあるのに私の環境では使えないものがあることに気が付きました。 例えば apt-get autoremove 試しにinstallしては不要なuninstallなどしていたので、deborphanなどで依存関係を整理して削除などしていたのですが、こんな便利なものがあるなら是非使いたい。 Debian etch 4.0が古いのが問題で、最新のDebian wheezy 7.0まで上げればよいのだと思い知り、更にネットで「kurobox pro wheezy」で調べてみると"出来る"ことが分かったので、思い切って上げてみることにしました。 新しいHDDに入れ替えて新規にDebian環境をセットアップ おそらくこれが一番トラブルが少ないであろうということで、新しいHDDに入れ替えてセットアップすることにしました。 使うのはノートPCのSSD化などで余っていた2.5inch 250G 5200rpmのHDDです。 玄箱PROはHDDのマウンターに2.5inch用のネジ穴が用意されているので、別途マウンターを用意する必要もありません。 シリアルコンソール必須です。私が使っているのはUP12C USB PDC Converterというやつです。 Windows7用のドライバー(U232-13.2.98.130315.zip)をインストールして準備完了。 TeraTermのSerial Port設定 Baud rate 115200 bps Data 8 bit Parity none Stop 1 bit Flow contro none 玄箱PROの電源ON 作業開始 Orion1 CPU = Low === KURO U-Boot. === ** LOADER ** ** KUROBOX BOARD KURO_BOX LE (CFG_ENV_ADDR=fffff000) U-Boot 1.1.1 (Apr 10 2007 - 18 10 08) Marvell version 1.12.1 - TINY DRAM CS[0] base 0x00000000 size 128MB DRAM Total size 128MB [256kB@fffc0000] Flash 256 kB Addresses 20M - 0M are saved for the U-Boot usage. Mem malloc Initialization (20M - 16M) Done NAND 256 MB Soc 88F5182 A2 CPU ARM926 (Rev 0) running @ 500Mhz Orion 1 streaming disabled SysClock = 250Mhz , TClock = 166Mhz USB 0 host mode USB 1 host mode PCI 0 PCI Express Root Complex Interface PCI 1 Conventional PCI, speed = 33000000 Net egiga0 [PRIME] Using 88E1118 phy hit any key to switch tftp boot. Hit any key to stop autoboot 0 system_bootend Hit any key to stop autoboot 3 ここでEnteryキーを押下してストップ 以下の5行を順番にコピペして貼り付け setenv bootargs_root root=/dev/mtdblock2 rw panic=5 setenv bootargs $(bootargs_base) $(bootargs_root) $(buffalo_ver) setenv bootcmd nboot $(default_kernel_addr) 0 $(nand_uImage_offset) ;setenv bootargs $(bootargs_base) $(bootargs_root) $(buffalo_ver); bootm $(default_kernel_addr) setenv nand_boot yes boot 続き Marvell setenv bootargs_root root=/dev/mtdblock2 rw panic=5 Marvell setenv bootargs $(bootargs_base) $(bootargs_root) $(buffalo_ver) Marvell setenv bootcmd nboot $(default_kernel_addr) 0 $(nand_uImage_offset) ;setenv bootargs $(bootargs_base) $(bootargs_root) $(buffalo_ver); bootm $(default_kernel_addr) Marvell setenv nand_boot yes Marvell boot Loading from device 0 NULL at 0xfa000000 (offset 0x20000) Image Name Linux-2.6.12.6-arm1 Created 2007-04-10 13 45 13 UTC Image Type ARM Linux Kernel Image (uncompressed) Data Size 1736548 Bytes = 1.7 MB Load Address 00008000 Entry Point 00008000 stop_sound ## Booting image at 00100000 ... Image Name Linux-2.6.12.6-arm1 Created 2007-04-10 13 45 13 UTC Image Type ARM Linux Kernel Image (uncompressed) Data Size 1736548 Bytes = 1.7 MB Load Address 00008000 Entry Point 00008000 Verifying Checksum ... OK OK Starting kernel ... arg console=ttyS0,115200 root=/dev/mtdblock2 rw panic=5 BOOTVER=1.091 CONFIG_KUROBOX_PLATFORM CONFIG_KUROBOX_KUROBOX --- Uncompressing Linux................................................................................................................. done, booting the kernel. Linux version 2.6.12.6-arm1 (root@dev-hara) (gcc version 3.4.4 (release) (CodeSourcery ARM 2005q3-2)) #27 Tue Apr 10 22 47 16 JST 2007 CPU ARM926EJ-Sid(wb) [41069260] revision 0 (ARMv5TEJ) CPU0 D VIVT write-back cache CPU0 I cache 32768 bytes, associativity 1, 32 byte lines, 1024 sets CPU0 D cache 32768 bytes, associativity 1, 32 byte lines, 1024 sets Machine MV-88fxx81 Using UBoot passing parameters structure Sys Clk = 250000000, Tclk = 166664740 Memory policy ECC disabled, Data cache writeback Built 1 zonelists Kernel command line console=ttyS0,115200 root=/dev/mtdblock2 rw panic=5 BOOTVER=1.091 PID hash table entries 1024 (order 10, 16384 bytes) Console colour dummy device 80x30 Dentry cache hash table entries 32768 (order 5, 131072 bytes) Inode-cache hash table entries 16384 (order 4, 65536 bytes) Memory 128MB 0MB 0MB 0MB = 128MB total Memory 126208KB available (3037K code, 426K data, 112K init) Mount-cache hash table entries 512 CPU Testing write buffer coherency ok NET Registered protocol family 16 serial_initialize_ttyS1 (Debug) ttyS1 is initialized. config_device_cs Error Unknown board CPU Interface ------------- SDRAM_CS0 ....base 00000000, size 128MB SDRAM_CS1 ....disable SDRAM_CS2 ....disable SDRAM_CS3 ....disable PEX0_MEM ....base e0000000, size 128MB PEX0_IO ....base f2000000, size 1MB PCI0_MEM ....base e8000000, size 128MB PCI0_IO ....base f2100000, size 1MB INTER_REGS ....base f1000000, size 1MB DEVICE_CS0 ....base fa000000, size 2MB DEVICE_CS1 ....base f4000000, size 32MB DEVICE_CS2 ....base fa800000, size 1MB DEV_BOOCS ....base ff800000, size 8MB CRYPTO ENG ....no such Flash bankwidth 1, base ff800000, size 400000 KUROBOX FLASH size 4096[KB] Marvell Development Board (LSP Version 1.10.3.patch5_DB_NAS)-- KUROBOX_BOARD_KUROBOX Soc 88F5182 A2 Detected Tclk 166664740 and SysClk 250000000 Marvell USB EHCI Host controller #0 c04e4b00 Marvell USB EHCI Host controller #1 c04e4a40 pexBarOverlapDetect winNum 2 overlap current 0 mvPexInit Warning Bar 2 size is illigal it will be disabled please check Pex and CPU windows configuration PCI bus0 Fast back to back transfers enabled PCI bus1 Fast back to back transfers enabled SCSI subsystem initialized usbcore registered new driver usbfs usbcore registered new driver hub Use the XOR engines (offloading) for enhancing the following functions o RAID 5 Xor calculation o kernel memcpy o kenrel memzero o copy user to/from kernel buffers Number of XOR engines to use 2 cesadev_init(c00122e4) Fast Floating Point Emulator V0.9 (c) Peter Teichmann. inotify device minor=63 JFFS2 version 2.2. (NAND) (C) 2001-2003 Red Hat, Inc. SGI XFS with no debug enabled Serial 8250/16550 driver $Revision 1.90 $ 4 ports, IRQ sharing disabled ttyS0 at MMIO 0x0 (irq = 3) is a 16550A ttyS1 at MMIO 0x0 (irq = 4) is a 16550A io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered RAMDISK driver initialized 3 RAM disks of 32768K size 1024 blocksize loop loaded (max 8 devices) Marvell Gigabit Ethernet Driver egiga o Ethernet descriptors in DRAM o DRAM SW cache-coherency o Checksum offload enabled o Loading network interface ** egiga_init_module (10) eth0 Intergrated Sata device found scsi0 Marvell SCSI to SATA adapter scsi1 Marvell SCSI to SATA adapter Vendor Hitachi Model HTS542525K9SA00 Rev BBFO Type Direct-Access ANSI SCSI revision 03 SCSI device sda 488397168 512-byte hdwr sectors (250059 MB) SCSI device sda drive cache write back SCSI device sda 488397168 512-byte hdwr sectors (250059 MB) SCSI device sda drive cache write back sda Attached scsi disk sda at scsi0, channel 0, id 0, lun 0 Attached scsi generic sg0 at scsi0, channel 0, id 0, lun 0, type 0 physmap flash device 400000 at ff800000 Found SST 39LF020 phys_mapped_flash Found 1 x8 devices at 0x0 in 8-bit bank number of JEDEC chips 1 cfi_cmdset_0002 Disabling erase-suspend-program due to code brokenness. RedBoot partition parsing not available Debug nand_scan nand_flash_ids[i].pagesize is exist Debug nand_scan mtd- erasesize=0x00020000 Debug nand_scan mtd- oobblock=0x00000800 Debug nand_scan mtd- oobsize=0x00000040 NAND device Manufacturer ID 0x20, Chip ID 0xda (ST Micro NAND 256MiB 3,3V 8-bit) Scanning device for bad blocks Bad eraseblock 854 at 0x06ac0000 Using static partition definition Creating 3 MTD partitions on "nand_mtd" 0x00000000-0x00400000 "uImage" 0x00400000-0x04400000 "rootfs" 0x04400000-0x10000000 "extra" usbmon debugs is not available ehci_platform ehci_platform.4523 EHCI Host Controller ehci_platform ehci_platform.4523 new USB bus registered, assigned bus number 1 ehci_platform ehci_platform.4523 irq 17, io mem 0x00000000 ehci_platform ehci_platform.4523 park 0 ehci_platform ehci_platform.4523 USB 0.0 initialized, EHCI 1.00, driver 10 Dec 2004 hub 1-0 1.0 USB hub found hub 1-0 1.0 1 port detected ehci_platform ehci_platform.16781 EHCI Host Controller ehci_platform ehci_platform.16781 new USB bus registered, assigned bus number 2 ehci_platform ehci_platform.16781 irq 12, io mem 0x00000000 ehci_platform ehci_platform.16781 park 0 ehci_platform ehci_platform.16781 USB 0.0 initialized, EHCI 1.00, driver 10 Dec 2004 hub 2-0 1.0 USB hub found hub 2-0 1.0 1 port detected USB Universal Host Controller Interface driver v2.2 Initializing USB Mass Storage driver... usbcore registered new driver usb-storage USB Mass Storage support registered. usbcore registered new driver usbhid drivers/usb/input/hid-core.c v2.01 USB HID core driver mice PS/2 mouse device common for all mice md raid0 personality registered as nr 2 md raid1 personality registered as nr 3 md raid5 personality registered as nr 4 raid5 measuring checksumming speed arm4regs 304.000 MB/sec 8regs 215.200 MB/sec 32regs 249.200 MB/sec raid5 using function arm4regs (304.000 MB/sec) md md driver 0.90.1 MAX_MD_DEVS=256, MD_SB_DISKS=27 Buffalo Platform Linux Driver(Light) 0.01 installed. MICON ctrl (C) BUFFALO INC. V.1.00 installed. Kernel event proc (C) BUFFALO INC. V.1.00 installed. MICON V2 (C) BUFFALO INC. V.1.00 installed. NET Registered protocol family 2 IP routing cache hash table of 1024 buckets, 8Kbytes TCP established hash table entries 8192 (order 4, 65536 bytes) TCP bind hash table entries 8192 (order 3, 32768 bytes) TCP Hash tables configured (established 8192 bind 8192) NET Registered protocol family 1 NET Registered protocol family 17 md Autodetecting RAID arrays. md autorun ... md ... autorun DONE. Empty flash at 0x00df85f8 ends at 0x00df8800 VFS Mounted root (jffs2 filesystem). Freeing init memory 112K --- rcStart (NANDroot) --- ===== Starting MountSystemFolders ===== mounting procfs ... [Success] mounting sysfs ... [Success] mouting usbfs ... [Success] remouting rootfs ... [Success] mounting all devices ... [Success] ===== Starting checkroot.sh ===== rm /var/lock/perfmon is a directory rm /var/lock/printing is a directory rm /var/lock/subsys is a directory [Success] ===== Starting Kevent.sh ===== [Success] ===== Starting mount_share.sh ===== Mounting /dev/sda on /mnt/disk1 as a xfs file system. XFS bad magic number XFS SB validate failed mount Mounting /dev/sda on /mnt/disk1 failed Invalid argument Failed. Mounting /dev/sda on /mnt/disk1 as a ext3 file system. mount Mounting /dev/sda on /mnt/disk1 failed Invalid argument Failed. Mounting /dev/mtd3 on /mnt/mtd as a jffs2 file system. Success. [Success] ===== Starting sethostname.sh ===== hostname is setted to KUROBOX-PRO [Success] ===== Starting networking.sh ===== create network files.. IP=[dhcp], netmask=[], dgw=[], dns1=[], dns2=[] killall dhcpcd no process killed route SIOC[ADD|DEL]RT No such process Configuration network interface lo eth0 requesting DHCP tout=30[s] eth0 link down eth0 link up 5 , full duplex 5 , speed 100 Mbps 5 /etc/dhcpc/dhcpcd.exe /etc/dhcpc/dhcpcd-eth0.info up dhcpcd.exe interface eth0 has been configured with old IP=192.168.3.50 hostname is setted to KUROBOX-PRO [Success] ===== Starting httpd.sh ===== [Success] ===== Starting telnet.sh ===== [Success] ===== Starting inetd.sh ===== [Success] ===== Starting smb.sh ===== $Starting SMB services $Starting NMB services [Success] ===== Starting clientUtil_servd.sh ===== Starting clientUtil_server starting on eth0 [Success] ===== Starting bootcomplete.sh ===== [Success] ===== Starting FanController.sh ===== [Success] ===== Starting boss.sh ===== ... .. -~~(~~ .~ shDBDhz+(-. .~+sDDBNBDhhszDBNNNNBNNNBDs - ~sBNNNNNNNNNNNNNNNNNNNNNNNNNBs -=DNNBNNNNNNNNNNNNNNNNNBNNNNNNNNBz .~zNNNNNNNNNNNNNNNNNNNNNNNNNNBNNNNNNNz~ ~hBNNNNBNNNNNNNNNNNNNNNNNNNNNNNNNNNNNND+ (hNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNBs- .~zNNNNNNNNNNNNNNNNNNNNNNNBNNNNNNBNNBNNNNNNBs ~sBNNNNNNNNNNNNNNNNNNNNNNNNNNNNBNNNNNNNNNNNNNz (+DNNNNNNNNNNNNNNNNNNNNNNDzNNNNNhzDNNBNNNNNNNNBs (sNNNNNNNNNNNNNNNNNNNNNNB=~hNNNN=~(sDNNNNNNNNNND (+DNNNNNNNNNNNNNNNNNNNNNNs .=NNNNz- (zDNNNNNNNNNz ~=BNNNNNNNNNNNNNNNNNNNNND- .=BNNNN . .(hNNNNNNNNB ~sNNNNNNNNNNNNNNNNNNNNND+. .+BNNNN+ ~sBNNNNNNN (zNNNNNNNNNNNNNNNNNNNNND ..+BNBNB=- .+BNNNNNNh (zNNNNNNNNNNNNNNNNNNNBB= . hNBBNs+- +DNNNBND (sNNNNNNNNNNNNNNNNNNNND( -DhDBN+ - . =NNNNNB ~+DNNBNNNNNNNNNNNNNNNNz =D=Dhh+( . ~DBNNNB ~(sNNNNNNNNNNNNNNNNNNNz. -hs(zz+ ( . .=NNNNN ~=NNBBBBNNNNNNNNNNNNB= ==-=+s((~. .~BNNNB ~=Nhs +++hNNNNNNNNBz - .~=-.s(+-(- hBNND =Ds+hz( ~hNNNNNNND+ ..-+ .-((( ~ ... -hNNNNDs ~+z(BN=. . BNNNNBhhDD=+ ~. ~-=shBBDhz+( -sBNNNBBNBz ~(=z(BD- ~~hBNNNs~-( zDDs+~(shzssszDBNDh= sBNNNNNNNBN ~~+s z=.-zh~sNNND . . zhhh==shDBNNNNNNNBDDNNNNNNNNNh ~~ ss+ .zBBs~zND+ ..-+zDBNNNNNNNNNNNhzNNNNNNNNND+ ~~(=h +DBz-sBs~ . (BBNNNNNNNNNz- BBNNBNNND= ~(~ zss(( (z sD+ ~DNNNNNNNNNz~ sNNNNNNDs ~(=Ds= ...-(h . . .. BNNNNNNNNz~ -hNNNBh ~(hNs(. =- .=BNNNNNBNs- .(hs== BNz~ . .(hBNNBDz .~ - -hNNh(. .. . (++~ . - . hBNB+ -+( . .- . zDNz( . ~+ - .. . .-. ..~(-. . . .~+(. .. -- . . . + ~ ~. ..... .- . ---(~~~( ~. .. . .((--- -~~(~ . . +s=(- -(+. Let s start a KURO-BOX! .... .(hBDzDD=. and have a fun time... .. .. . sDh+. . .. . ..-- . .. .. ... ....... . . .. .. - .. ... [Success] KUROUTOSHIKOU KUROBOX Series KUROBOX/PRO(KOSHO) KUROBOX-PRO login root, kuroadminでログイン sdaとして識別されている新しい2.5inchのHDDでパーティションを作成する BusyBox v1.1.1 (2007.04.06-12 02+0000) Built-in shell (ash) Enter help for a list of built-in commands. ~ # fdisk /dev/sda The number of cylinders for this disk is set to 30401. There is nothing wrong with that, but this is larger than 1024, and could in certain setups cause problems with 1) software that runs at boot time (e.g., old versions of LILO) 2) booting and partitioning software from other OSs (e.g., DOS FDISK, OS/2 FDISK) Command (m for help) n Command action e extended p primary partition (1-4) p Partition number (1-4) 1 First cylinder (1-30401, default 1) Using default value 1 Last cylinder or +size or +sizeM or +sizeK (1-30401, default 30401) Using default value 30401 Command (m for help) w The partition table has been altered! Calling ioctl() to re-read partition table. SCSI device sda 488397168 512-byte hdwr sectors (250059 MB) SCSI device sda drive cache write back sda sda1 SCSI device sda 488397168 512-byte hdwr sectors (250059 MB) SCSI device sda drive cache write back sda sda1 Syncing disks. 次にファイルシステムの作成 ~ # mkfs.ext2 /dev/sda1 mke2fs 1.27 (8-Mar-2002) Filesystem label= OS type Linux Block size=4096 (log=2) Fragment size=4096 (log=2) 30539776 inodes, 61049000 blocks 3052450 blocks (5.00%) reserved for the super user First data block=0 1864 block groups 32768 blocks per group, 32768 fragments per group 16384 inodes per group Superblock backups stored on blocks 32768, 98304, 163840, 229376, 294912, 819200, 884736, 1605632, 2654208, 4096000, 7962624, 11239424, 20480000, 23887872 Writing inode tables done Writing superblocks and filesystem accounting information done This filesystem will be automatically checked every 35 mounts or 180 days, whichever comes first. Use tune2fs -c or -i to override. 続いてマウントして必要なファイルを取得 ~ # mount -t ext2 /dev/sda1 /mnt/disk1 ~ # cd /mnt/disk1 /mnt/disk1 # wget http //ftp.jp.debian.org/debian/dists/wheezy/main/installer-ar mel/current/images/orion5x/network-console/buffalo/kuroboxpro/config-debian wget ftp.jp.debian.org Unknown host と思いきや Unknown Host、、、あれ？ネットワークつながっていない？名前解決できていないのかな？ 他の参考サイトではnsswitch.confを書き換えていたので試してみる。 /mnt/disk1 # vi /etc/nsswitch.conf hosts files ↓dnsを追加 hosts files dns で再起動 /mnt/disk1 # reboot /mnt/disk1 # ----- rcDown ----- ===== Starting shutdown_start.sh ===== [Success] ===== Starting shutdown_proc.sh ===== ===== Starting clientUtil_servd.sh ===== Stop clientUtil_server [Success] ===== Starting smb.sh ===== $Shutting down SMB services killall Could not kill pid 658 No such process $Shutting down NMB services [Failed ] ===== Starting networking.sh ===== Deconfiguration network interface lo eth0 killall dhcpcd no process killed [Success] ===== Starting Kevent.sh ===== [Success] ===== Starting FanController.sh ===== Stopping a fan ........... [Success] [Success] ===== Starting umount_disk.sh ===== [Success] The system is going down NOW !! Sending SIGTERM to all processes. Sending SIPlease stand by while rebooting the system. md stopping all md devices. md md0 switched to read-only mode. Synchronizing SCSI cache for disk sda Restarting system. Orion1 CPU = Low === KURO U-Boot. === ** LOADER ** ** KUROBOX BOARD KURO_BOX LE (CFG_ENV_ADDR=fffff000) U-Boot 1.1.1 (Apr 10 2007 - 18 10 08) Marvell version 1.12.1 - TINY DRAM CS[0] base 0x00000000 size 128MB DRAM Total size 128MB [256kB@fffc0000] Flash 256 kB Addresses 20M - 0M are saved for the U-Boot usage. Mem malloc Initialization (20M - 16M) Done NAND 256 MB Soc 88F5182 A2 CPU ARM926 (Rev 0) running @ 500Mhz Orion 1 streaming disabled SysClock = 250Mhz , TClock = 166Mhz USB 0 host mode USB 1 host mode PCI 0 PCI Express Root Complex Interface PCI 1 Conventional PCI, speed = 33000000 Net egiga0 [PRIME] Using 88E1118 phy hit any key to switch tftp boot. Hit any key to stop autoboot 0 system_bootend Hit any key to stop autoboot 3 またここでEnteryキーでストップ お決まりの5行を入力 Marvell setenv bootargs_root root=/dev/mtdblock2 rw panic=5 Marvell setenv bootargs $(bootargs_base) $(bootargs_root) $(buffalo_ver) Marvell setenv bootcmd nboot $(default_kernel_addr) 0 $(nand_uImage_offset) ;setenv bootargs $(bootargs_base) $(bootargs_root) $(buffalo_ver); bootm $(default_kernel_addr) Marvell setenv nand_boot yes Marvell boot Loading from device 0 NULL at 0xfa000000 (offset 0x20000) Image Name Linux-2.6.12.6-arm1 Created 2007-04-10 13 45 13 UTC Image Type ARM Linux Kernel Image (uncompressed) Data Size 1736548 Bytes = 1.7 MB Load Address 00008000 Entry Point 00008000 stop_sound ## Booting image at 00100000 ... Image Name Linux-2.6.12.6-arm1 Created 2007-04-10 13 45 13 UTC Image Type ARM Linux Kernel Image (uncompressed) Data Size 1736548 Bytes = 1.7 MB Load Address 00008000 Entry Point 00008000 Verifying Checksum ... OK OK Starting kernel ... arg console=ttyS0,115200 root=/dev/mtdblock2 rw panic=5 BOOTVER=1.091 CONFIG_KUROBOX_PLATFORM CONFIG_KUROBOX_KUROBOX --- Uncompressing Linux................................................................................................................. done, booting the kernel. Linux version 2.6.12.6-arm1 (root@dev-hara) (gcc version 3.4.4 (release) (CodeSourcery ARM 2005q3-2)) #27 Tue Apr 10 22 47 16 JST 2007 CPU ARM926EJ-Sid(wb) [41069260] revision 0 (ARMv5TEJ) CPU0 D VIVT write-back cache CPU0 I cache 32768 bytes, associativity 1, 32 byte lines, 1024 sets CPU0 D cache 32768 bytes, associativity 1, 32 byte lines, 1024 sets Machine MV-88fxx81 Using UBoot passing parameters structure Sys Clk = 250000000, Tclk = 166664740 Memory policy ECC disabled, Data cache writeback Built 1 zonelists Kernel command line console=ttyS0,115200 root=/dev/mtdblock2 rw panic=5 BOOTVER=1.091 PID hash table entries 1024 (order 10, 16384 bytes) Console colour dummy device 80x30 Dentry cache hash table entries 32768 (order 5, 131072 bytes) Inode-cache hash table entries 16384 (order 4, 65536 bytes) Memory 128MB 0MB 0MB 0MB = 128MB total Memory 126208KB available (3037K code, 426K data, 112K init) Mount-cache hash table entries 512 CPU Testing write buffer coherency ok NET Registered protocol family 16 serial_initialize_ttyS1 (Debug) ttyS1 is initialized. config_device_cs Error Unknown board CPU Interface ------------- SDRAM_CS0 ....base 00000000, size 128MB SDRAM_CS1 ....disable SDRAM_CS2 ....disable SDRAM_CS3 ....disable PEX0_MEM ....base e0000000, size 128MB PEX0_IO ....base f2000000, size 1MB PCI0_MEM ....base e8000000, size 128MB PCI0_IO ....base f2100000, size 1MB INTER_REGS ....base f1000000, size 1MB DEVICE_CS0 ....base fa000000, size 2MB DEVICE_CS1 ....base f4000000, size 32MB DEVICE_CS2 ....base fa800000, size 1MB DEV_BOOCS ....base ff800000, size 8MB CRYPTO ENG ....no such Flash bankwidth 1, base ff800000, size 400000 KUROBOX FLASH size 4096[KB] Marvell Development Board (LSP Version 1.10.3.patch5_DB_NAS)-- KUROBOX_BOARD_KUROBOX Soc 88F5182 A2 Detected Tclk 166664740 and SysClk 250000000 Marvell USB EHCI Host controller #0 c04e4b00 Marvell USB EHCI Host controller #1 c04e4a40 pexBarOverlapDetect winNum 2 overlap current 0 mvPexInit Warning Bar 2 size is illigal it will be disabled please check Pex and CPU windows configuration PCI bus0 Fast back to back transfers enabled PCI bus1 Fast back to back transfers enabled SCSI subsystem initialized usbcore registered new driver usbfs usbcore registered new driver hub Use the XOR engines (offloading) for enhancing the following functions o RAID 5 Xor calculation o kernel memcpy o kenrel memzero o copy user to/from kernel buffers Number of XOR engines to use 2 cesadev_init(c00122e4) Fast Floating Point Emulator V0.9 (c) Peter Teichmann. inotify device minor=63 JFFS2 version 2.2. (NAND) (C) 2001-2003 Red Hat, Inc. SGI XFS with no debug enabled Serial 8250/16550 driver $Revision 1.90 $ 4 ports, IRQ sharing disabled ttyS0 at MMIO 0x0 (irq = 3) is a 16550A ttyS1 at MMIO 0x0 (irq = 4) is a 16550A io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered RAMDISK driver initialized 3 RAM disks of 32768K size 1024 blocksize loop loaded (max 8 devices) Marvell Gigabit Ethernet Driver egiga o Ethernet descriptors in DRAM o DRAM SW cache-coherency o Checksum offload enabled o Loading network interface ** egiga_init_module (10) eth0 Intergrated Sata device found scsi0 Marvell SCSI to SATA adapter scsi1 Marvell SCSI to SATA adapter Vendor Hitachi Model HTS542525K9SA00 Rev BBFO Type Direct-Access ANSI SCSI revision 03 SCSI device sda 488397168 512-byte hdwr sectors (250059 MB) SCSI device sda drive cache write back SCSI device sda 488397168 512-byte hdwr sectors (250059 MB) SCSI device sda drive cache write back sda sda1 Attached scsi disk sda at scsi0, channel 0, id 0, lun 0 Attached scsi generic sg0 at scsi0, channel 0, id 0, lun 0, type 0 physmap flash device 400000 at ff800000 Found SST 39LF020 phys_mapped_flash Found 1 x8 devices at 0x0 in 8-bit bank number of JEDEC chips 1 cfi_cmdset_0002 Disabling erase-suspend-program due to code brokenness. RedBoot partition parsing not available Debug nand_scan nand_flash_ids[i].pagesize is exist Debug nand_scan mtd- erasesize=0x00020000 Debug nand_scan mtd- oobblock=0x00000800 Debug nand_scan mtd- oobsize=0x00000040 NAND device Manufacturer ID 0x20, Chip ID 0xda (ST Micro NAND 256MiB 3,3V 8-bit) Scanning device for bad blocks Bad eraseblock 854 at 0x06ac0000 Using static partition definition Creating 3 MTD partitions on "nand_mtd" 0x00000000-0x00400000 "uImage" 0x00400000-0x04400000 "rootfs" 0x04400000-0x10000000 "extra" usbmon debugs is not available ehci_platform ehci_platform.4523 EHCI Host Controller ehci_platform ehci_platform.4523 new USB bus registered, assigned bus number 1 ehci_platform ehci_platform.4523 irq 17, io mem 0x00000000 ehci_platform ehci_platform.4523 park 0 ehci_platform ehci_platform.4523 USB 0.0 initialized, EHCI 1.00, driver 10 Dec 2004 hub 1-0 1.0 USB hub found hub 1-0 1.0 1 port detected ehci_platform ehci_platform.16781 EHCI Host Controller ehci_platform ehci_platform.16781 new USB bus registered, assigned bus number 2 ehci_platform ehci_platform.16781 irq 12, io mem 0x00000000 ehci_platform ehci_platform.16781 park 0 ehci_platform ehci_platform.16781 USB 0.0 initialized, EHCI 1.00, driver 10 Dec 2004 hub 2-0 1.0 USB hub found hub 2-0 1.0 1 port detected USB Universal Host Controller Interface driver v2.2 Initializing USB Mass Storage driver... usbcore registered new driver usb-storage USB Mass Storage support registered. usbcore registered new driver usbhid drivers/usb/input/hid-core.c v2.01 USB HID core driver mice PS/2 mouse device common for all mice md raid0 personality registered as nr 2 md raid1 personality registered as nr 3 md raid5 personality registered as nr 4 raid5 measuring checksumming speed arm4regs 304.000 MB/sec 8regs 215.200 MB/sec 32regs 249.200 MB/sec raid5 using function arm4regs (304.000 MB/sec) md md driver 0.90.1 MAX_MD_DEVS=256, MD_SB_DISKS=27 Buffalo Platform Linux Driver(Light) 0.01 installed. MICON ctrl (C) BUFFALO INC. V.1.00 installed. Kernel event proc (C) BUFFALO INC. V.1.00 installed. MICON V2 (C) BUFFALO INC. V.1.00 installed. NET Registered protocol family 2 IP routing cache hash table of 1024 buckets, 8Kbytes TCP established hash table entries 8192 (order 4, 65536 bytes) TCP bind hash table entries 8192 (order 3, 32768 bytes) TCP Hash tables configured (established 8192 bind 8192) NET Registered protocol family 1 NET Registered protocol family 17 md Autodetecting RAID arrays. md autorun ... md ... autorun DONE. Empty flash at 0x00df85f8 ends at 0x00df8800 VFS Mounted root (jffs2 filesystem). Freeing init memory 112K --- rcStart (NANDroot) --- ===== Starting MountSystemFolders ===== mounting procfs ... [Success] mounting sysfs ... [Success] mouting usbfs ... [Success] remouting rootfs ... [Success] mounting all devices ... [Success] ===== Starting checkroot.sh ===== rm /var/lock/perfmon is a directory rm /var/lock/printing is a directory rm /var/lock/subsys is a directory [Success] ===== Starting Kevent.sh ===== [Success] ===== Starting mount_share.sh ===== Mounting /dev/sda1 on /mnt/disk1 as a xfs file system. XFS bad magic number XFS SB validate failed mount Mounting /dev/sda1 on /mnt/disk1 failed Invalid argument Failed. Mounting /dev/sda1 on /mnt/disk1 as a ext3 file system. mount Mounting /dev/sda1 on /mnt/disk1 failed Invalid argument Failed. Mounting /dev/mtd3 on /mnt/mtd as a jffs2 file system. Success. [Success] ===== Starting sethostname.sh ===== hostname is setted to KUROBOX-PRO [Success] ===== Starting networking.sh ===== create network files.. IP=[dhcp], netmask=[], dgw=[], dns1=[], dns2=[] killall dhcpcd no process killed route SIOC[ADD|DEL]RT No such process Configuration network interface lo eth0 requesting DHCP tout=30[s] eth0 link down eth0 link up 5 , full duplex 5 , speed 100 Mbps 5 /etc/dhcpc/dhcpcd.exe /etc/dhcpc/dhcpcd-eth0.info up dhcpcd.exe interface eth0 has been configured with old IP=192.168.3.50 hostname is setted to KUROBOX-PRO [Success] ===== Starting httpd.sh ===== [Success] ===== Starting telnet.sh ===== [Success] ===== Starting inetd.sh ===== [Success] ===== Starting smb.sh ===== $Starting SMB services $Starting NMB services [Success] ===== Starting clientUtil_servd.sh ===== Starting clientUtil_server starting on eth0 [Success] ===== Starting bootcomplete.sh ===== [Success] ===== Starting FanController.sh ===== [Success] ===== Starting boss.sh ===== ... .. -~~(~~ .~ shDBDhz+(-. .~+sDDBNBDhhszDBNNNNBNNNBDs - ~sBNNNNNNNNNNNNNNNNNNNNNNNNNBs -=DNNBNNNNNNNNNNNNNNNNNBNNNNNNNNBz .~zNNNNNNNNNNNNNNNNNNNNNNNNNNBNNNNNNNz~ ~hBNNNNBNNNNNNNNNNNNNNNNNNNNNNNNNNNNNND+ (hNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNBs- .~zNNNNNNNNNNNNNNNNNNNNNNNBNNNNNNBNNBNNNNNNBs ~sBNNNNNNNNNNNNNNNNNNNNNNNNNNNNBNNNNNNNNNNNNNz (+DNNNNNNNNNNNNNNNNNNNNNNDzNNNNNhzDNNBNNNNNNNNBs (sNNNNNNNNNNNNNNNNNNNNNNB=~hNNNN=~(sDNNNNNNNNNND (+DNNNNNNNNNNNNNNNNNNNNNNs .=NNNNz- (zDNNNNNNNNNz ~=BNNNNNNNNNNNNNNNNNNNNND- .=BNNNN . .(hNNNNNNNNB ~sNNNNNNNNNNNNNNNNNNNNND+. .+BNNNN+ ~sBNNNNNNN (zNNNNNNNNNNNNNNNNNNNNND ..+BNBNB=- .+BNNNNNNh (zNNNNNNNNNNNNNNNNNNNBB= . hNBBNs+- +DNNNBND (sNNNNNNNNNNNNNNNNNNNND( -DhDBN+ - . =NNNNNB ~+DNNBNNNNNNNNNNNNNNNNz =D=Dhh+( . ~DBNNNB ~(sNNNNNNNNNNNNNNNNNNNz. -hs(zz+ ( . .=NNNNN ~=NNBBBBNNNNNNNNNNNNB= ==-=+s((~. .~BNNNB ~=Nhs +++hNNNNNNNNBz - .~=-.s(+-(- hBNND =Ds+hz( ~hNNNNNNND+ ..-+ .-((( ~ ... -hNNNNDs ~+z(BN=. . BNNNNBhhDD=+ ~. ~-=shBBDhz+( -sBNNNBBNBz ~(=z(BD- ~~hBNNNs~-( zDDs+~(shzssszDBNDh= sBNNNNNNNBN ~~+s z=.-zh~sNNND . . zhhh==shDBNNNNNNNBDDNNNNNNNNNh ~~ ss+ .zBBs~zND+ ..-+zDBNNNNNNNNNNNhzNNNNNNNNND+ ~~(=h +DBz-sBs~ . (BBNNNNNNNNNz- BBNNBNNND= ~(~ zss(( (z sD+ ~DNNNNNNNNNz~ sNNNNNNDs ~(=Ds= ...-(h . . .. BNNNNNNNNz~ -hNNNBh ~(hNs(. =- .=BNNNNNBNs- .(hs== BNz~ . .(hBNNBDz .~ - -hNNh(. .. . (++~ . - . hBNB+ -+( . .- . zDNz( . ~+ - .. . .-. ..~(-. . . .~+(. .. -- . . . + ~ ~. ..... .- . ---(~~~( ~. .. . .((--- -~~(~ . . +s=(- -(+. Let s start a KURO-BOX! .... .(hBDzDD=. and have a fun time... .. .. . sDh+. . .. . ..-- . .. .. ... ....... . . .. .. - .. ... [Success] KUROUTOSHIKOU KUROBOX Series KUROBOX/PRO(KOSHO) KUROBOX-PRO login root Password login[782] root login on `ttyS0 BusyBox v1.1.1 (2007.04.06-12 02+0000) Built-in shell (ash) Enter help for a list of built-in commands. ~ # mount -t ext2 /dev/sda1 /mnt/disk1 EXT2-fs warning mounting unchecked fs, running e2fsck is recommended ~ # cd /mnt/disk1 /mnt/disk1 # ls -l -rw-r--r-- 1 root root 0 Mar 10 13 00 config-debian drwx------ 2 root root 16384 Mar 10 13 00 lost+found 警告が出ているけど気にしない。 さっき失敗した必要なファイルのwgetを実行してみる。 /mnt/disk1 # wget http //ftp.jp.debian.org/debian/dists/wheezy/main/installer-armel/current/images/orion5x/network-console/buffalo/kuroboxpro/config-debian Connecting to ftp.jp.debian.org[203.178.137.175] 80 config-debian 100% |*****************************| 1535 00 00 ETA /mnt/disk1 # wget http //ftp.jp.debian.org/debian/dists/wheezy/main/installer-armel/current/images/orion5x/network-console/buffalo/kuroboxpro/initrd.buffalo Connecting to ftp.jp.debian.org[203.178.137.175] 80 initrd.buffalo 100% |*****************************| 5035 KB 00 00 ETA /mnt/disk1 # wget http //ftp.jp.debian.org/debian/dists/wheezy/main/installer-armel/current/images/orion5x/network-console/buffalo/kuroboxpro/uImage.buffalo Connecting to ftp.jp.debian.org[203.178.137.175] 80 uImage.buffalo 100% |*****************************| 1450 KB 00 00 ETA いけた では早速セットアップへ /mnt/disk1 # sh config-debian Saving U-Boot environment to ubootenv.bak... done. Changing U-Boot environment... nvram_set bootcmd = ide reset; ext2load ide 0 1 $(default_kernel_addr) /$(kernel); ext2load ide 0 1 $(default_initrd_addr) /$(initrd); setenv bootargs $(bootargs_base); bootm $(default_kernel_addr) $(default_initrd_addr) done. Please reboot your Kurobox Pro. nvram使って書き換えればシリアルコンソール要らないのか… では再起動 nvramで書き換えられたので今度はストップが要らないので気楽に待つ。 /mnt/disk1 # reboot /mnt/disk1 # ----- rcDown ----- ===== Starting shutdown_start.sh ===== [Success] ===== Starting shutdown_proc.sh ===== ===== Starting clientUtil_servd.sh ===== Stop clientUtil_server [Success] ===== Starting smb.sh ===== $Shutting down SMB services $Shutting down NMB services [Success] ===== Starting networking.sh ===== Deconfiguration network interface lo eth0 killall dhcpcd no process killed [Success] ===== Starting Kevent.sh ===== [Success] ===== Starting FanController.sh ===== Stopping a fan ........... [Success] [Success] ===== Starting umount_disk.sh ===== [Success] The system is going down NOW !! Sending SIGTERM to all processes. Sending SIPlease stand by while rebooting the system. md stopping all md devices. md md0 switched to read-only mode. Synchronizing SCSI cache for disk sda Restarting system. Orion1 CPU = Low === KURO U-Boot. === ** LOADER ** ** KUROBOX BOARD KURO_BOX LE (CFG_ENV_ADDR=fffff000) U-Boot 1.1.1 (Apr 10 2007 - 18 10 08) Marvell version 1.12.1 - TINY DRAM CS[0] base 0x00000000 size 128MB DRAM Total size 128MB [256kB@fffc0000] Flash 256 kB Addresses 20M - 0M are saved for the U-Boot usage. Mem malloc Initialization (20M - 16M) Done NAND 256 MB Soc 88F5182 A2 CPU ARM926 (Rev 0) running @ 500Mhz Orion 1 streaming disabled SysClock = 250Mhz , TClock = 166Mhz USB 0 host mode USB 1 host mode PCI 0 PCI Express Root Complex Interface PCI 1 Conventional PCI, speed = 33000000 Net egiga0 [PRIME] Using 88E1118 phy hit any key to switch tftp boot. Hit any key to stop autoboot 2 1 0 system_bootend Hit any key to stop autoboot 3 2 1 0 Reset IDE Marvell Serial ATA Adapter Integrated Sata device found Device 0 OK Model Hitachi HTS542525K9SA00 Firm BBFOC31P Ser# 080422BB6F00WDDDBT6G Type Hard Disk Supports 48-bit addressing Capacity 238475.1 MB = 232.8 GB (488397168 x 512) Using device ide0, partition 1 Loading from block device ide device 0, partition 1 Name hda1 Type U-Boot File /uImage.buffalo 1485560 bytes read Using device ide0, partition 1 Loading from block device ide device 0, partition 1 Name hda1 Type U-Boot File /initrd.buffalo 5156040 bytes read stop_sound ## Booting image at 00100000 ... Image Name Debian kernel Created 2015-01-05 9 34 29 UTC Image Type ARM Linux Kernel Image (uncompressed) Data Size 1485496 Bytes = 1.4 MB Load Address 00008000 Entry Point 00008000 Verifying Checksum ... OK OK ## Loading Ramdisk Image at 02000000 ... Image Name debian-installer ramdisk Created 2015-01-05 9 34 30 UTC Image Type ARM Linux RAMDisk Image (gzip compressed) Data Size 5155976 Bytes = 4.9 MB Load Address 02000000 Entry Point 02000000 Verifying Checksum ... OK Starting kernel ... arg console=ttyS0,115200 Uncompressing Linux... done, booting the kernel. [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.2.0-4-orion5x (debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-14) ) #1 Debian 3.2.65-1 [ 0.000000] CPU Feroceon [41069260] revision 0 (ARMv5TEJ), cr=a0053177 [ 0.000000] CPU VIVT data cache, VIVT instruction cache [ 0.000000] Machine Buffalo/Revogear Kurobox Pro [ 0.000000] Clearing invalid memory bank 0KB@0xffffffff [ 0.000000] Clearing invalid memory bank 0KB@0xffffffff [ 0.000000] Clearing invalid memory bank 0KB@0xffffffff [ 0.000000] Ignoring unrecognised tag 0x00000000 [ 0.000000] Ignoring unrecognised tag 0x00000000 [ 0.000000] Ignoring unrecognised tag 0x00000000 [ 0.000000] Ignoring unrecognised tag 0x41000403 [ 0.000000] Memory policy ECC disabled, Data cache writeback [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages 32512 [ 0.000000] Kernel command line console=ttyS0,115200 [ 0.000000] PID hash table entries 512 (order -1, 2048 bytes) [ 0.000000] Dentry cache hash table entries 16384 (order 4, 65536 bytes) [ 0.000000] Inode-cache hash table entries 8192 (order 3, 32768 bytes) [ 0.000000] Memory 128MB = 128MB total [ 0.000000] Memory 120408k/120408k available, 10664k reserved, 0K highmem [ 0.000000] Virtual kernel memory layout [ 0.000000] vector 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap 0xfff00000 - 0xfffe0000 ( 896 kB) [ 0.000000] vmalloc 0xc8800000 - 0xfd800000 ( 848 MB) [ 0.000000] lowmem 0xc0000000 - 0xc8000000 ( 128 MB) [ 0.000000] modules 0xbf000000 - 0xc0000000 ( 16 MB) [ 0.000000] .text 0xc0008000 - 0xc039c088 (3665 kB) [ 0.000000] .init 0xc039d000 - 0xc03c0000 ( 140 kB) [ 0.000000] .data 0xc03c0000 - 0xc03f9fc0 ( 232 kB) [ 0.000000] .bss 0xc03f9fe4 - 0xc045ca7c ( 395 kB) [ 0.000000] NR_IRQS 64 [ 0.000000] sched_clock 32 bits at 166MHz, resolution 5ns, wraps every 25769ms [ 0.000000] Console colour dummy device 80x30 [ 12.137424] Calibrating delay loop... 265.42 BogoMIPS (lpj=1327104) [ 12.207116] pid_max default 32768 minimum 301 [ 12.207429] Security Framework initialized [ 12.207612] Mount-cache hash table entries 512 [ 12.208337] Initializing cgroup subsys cpuacct [ 12.208386] Initializing cgroup subsys memory [ 12.208447] Initializing cgroup subsys devices [ 12.208479] Initializing cgroup subsys freezer [ 12.208509] Initializing cgroup subsys net_cls [ 12.208538] Initializing cgroup subsys blkio [ 12.208594] Initializing cgroup subsys perf_event [ 12.208780] CPU Testing write buffer coherency ok [ 12.211324] devtmpfs initialized [ 12.214771] print_constraints dummy [ 12.215226] NET Registered protocol family 16 [ 12.216750] Orion ID MV88F5182-A2. TCLK=166666667. [ 12.220449] Applying Orion-1/Orion-NAS PCIe config read transaction workaround [ 12.221209] PCI bus0 Fast back to back transfers disabled [ 12.227298] bio create slab bio-0 at 0 [ 12.228474] vgaarb loaded [ 12.230422] Switching to clocksource orion_clocksource [ 12.275838] NET Registered protocol family 2 [ 12.309253] IP route cache hash table entries 1024 (order 0, 4096 bytes) [ 12.311082] TCP established hash table entries 4096 (order 3, 32768 bytes) [ 12.311351] TCP bind hash table entries 4096 (order 2, 16384 bytes) [ 12.311497] TCP Hash tables configured (established 4096 bind 4096) [ 12.311529] TCP reno registered [ 12.311571] UDP hash table entries 256 (order 0, 4096 bytes) [ 12.311643] UDP-Lite hash table entries 256 (order 0, 4096 bytes) [ 12.312257] NET Registered protocol family 1 [ 12.312796] Unpacking initramfs... [ 13.580333] Freeing initrd memory 5032K [ 13.580367] NetWinder Floating Point Emulator V0.97 (double precision) [ 13.581885] audit initializing netlink socket (disabled) [ 13.581971] type=2000 audit(1.440 1) initialized [ 13.585681] VFS Disk quotas dquot_6.5.2 [ 13.585931] Dquot-cache hash table entries 1024 (order 0, 4096 bytes) [ 13.586223] msgmni has been set to 245 [ 13.587723] alg No test for stdrng (krng) [ 13.588000] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 13.588042] io scheduler noop registered [ 13.588070] io scheduler deadline registered [ 13.588224] io scheduler cfq registered (default) [ 13.588469] mv_xor_shared mv_xor_shared.0 Marvell shared XOR driver [ 13.620611] mv_xor mv_xor.0 Marvell XOR ( xor cpy ) [ 13.660607] mv_xor mv_xor.1 Marvell XOR ( xor fill cpy ) [ 13.661638] Serial 8250/16550 driver, 2 ports, IRQ sharing disabled [ 13.683265] serial8250.0 ttyS0 at MMIO 0xf1012000 (irq = 3) is a 16550A [ 14.110384] console [ttyS0] enabled [ 14.134756] serial8250.1 ttyS1 at MMIO 0xf1012100 (irq = 4) is a 16550A [ 14.143600] physmap platform flash device 00040000 at f4000000 [ 14.149754] Found SST 39LF020 [ 14.152909] physmap-flash.0 Found 1 x8 devices at 0x0 in 8-bit bank [ 14.159280] number of JEDEC chips 1 [ 14.193019] NAND device Manufacturer ID 0x20, Chip ID 0xda (ST Micro NAND 256MiB 3,3V 8-bit) [ 14.201822] Scanning device for bad blocks [ 14.238566] Bad eraseblock 854 at 0x000006ac0000 [ 14.300751] Creating 3 MTD partitions on "orion_nand" [ 14.305909] 0x000000000000-0x000000400000 "uImage" [ 14.313476] 0x000000400000-0x000004400000 "rootfs" [ 14.321188] 0x000004400000-0x000010000000 "extra" [ 14.330054] mousedev PS/2 mouse device common for all mice [ 14.336587] i2c /dev entries driver [ 14.344783] rtc-rs5c372 0-0032 rs5c372a found, 24hr, driver version 0.6 [ 14.356860] rtc-rs5c372 0-0032 rtc core registered rtc-rs5c372 as rtc0 [ 14.366220] TCP cubic registered [ 14.369459] NET Registered protocol family 17 [ 14.374013] Registering the dns_resolver key type [ 14.378787] VFP support v0.3 not present [ 14.384110] registered taskstats version 1 [ 14.390002] rtc-rs5c372 0-0032 setting system clock to 2015-03-10 13 08 56 UTC (1425992936) [ 14.398628] Initializing network drop monitor service [ 14.405299] Freeing init memory 140K [ 14.826405] mv643xx_eth MV-643xx 10/100/1000 ethernet driver version 1.4 [ 14.936417] mv643xx_eth smi probed [ 15.061986] mv643xx_eth_port mv643xx_eth_port.0 eth0 port 0 with MAC address XX XX XX XX XX XX [ 15.214283] usbcore registered new interface driver usbfs [ 15.219976] usbcore registered new interface driver hub [ 15.277235] SCSI subsystem initialized [ 15.283887] usbcore registered new device driver usb [ 15.292303] ehci_hcd USB 2.0 Enhanced Host Controller (EHCI) Driver [ 15.298959] orion-ehci orion-ehci.0 Marvell Orion EHCI [ 15.385903] orion-ehci orion-ehci.0 new USB bus registered, assigned bus number 1 [ 15.480681] orion-ehci orion-ehci.0 irq 17, io mem 0xf1050000 [ 15.501970] orion-ehci orion-ehci.0 USB 2.0 started, EHCI 1.00 [ 15.508052] usb usb1 New USB device found, idVendor=1d6b, idProduct=0002 [ 15.514915] usb usb1 New USB device strings Mfr=3, Product=2, SerialNumber=1 [ 15.522165] usb usb1 Product Marvell Orion EHCI [ 15.526876] usb usb1 Manufacturer Linux 3.2.0-4-orion5x ehci_hcd [ 15.533085] usb usb1 SerialNumber orion-ehci.0 [ 15.665815] hub 1-0 1.0 USB hub found [ 15.669602] hub 1-0 1.0 1 port detected [ 15.702305] sata_mv sata_mv.0 slots 32 ports 2 [ 15.741857] scsi0 sata_mv [ 15.764300] scsi1 sata_mv [ 15.767884] ata1 SATA max UDMA/133 irq 29 [ 15.772067] ata2 SATA max UDMA/133 irq 29 [ 15.800881] orion-ehci orion-ehci.1 Marvell Orion EHCI [ 15.806200] orion-ehci orion-ehci.1 new USB bus registered, assigned bus number 2 [ 15.860686] orion-ehci orion-ehci.1 irq 12, io mem 0xf10a0000 [ 15.880672] orion-ehci orion-ehci.1 USB 2.0 started, EHCI 1.00 [ 15.886761] usb usb2 New USB device found, idVendor=1d6b, idProduct=0002 [ 15.893624] usb usb2 New USB device strings Mfr=3, Product=2, SerialNumber=1 [ 15.900882] usb usb2 Product Marvell Orion EHCI [ 15.905592] usb usb2 Manufacturer Linux 3.2.0-4-orion5x ehci_hcd [ 15.911801] usb usb2 SerialNumber orion-ehci.1 [ 15.988111] hub 2-0 1.0 USB hub found [ 16.000727] hub 2-0 1.0 1 port detected [ 16.280569] ata1 SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 16.320626] ata1.00 ATA-8 Hitachi HTS542525K9SA00, BBFOC31P, max UDMA/133 [ 16.327593] ata1.00 488397168 sectors, multi 0 LBA48 NCQ (depth 31/32) [ 16.390642] ata1.00 configured for UDMA/133 [ 16.395692] scsi 0 0 0 0 Direct-Access ATA Hitachi HTS54252 BBFO PQ 0 ANSI 5 [ 16.750560] ata2 SATA link down (SStatus 0 SControl 300) [ 16.875256] sd 0 0 0 0 [sda] 488397168 512-byte logical blocks (250 GB/232 GiB) [ 16.886139] sd 0 0 0 0 [sda] Write Protect is off [ 16.891416] sd 0 0 0 0 [sda] Write cache enabled, read cache enabled, doesn t support DPO or FUA [ 17.271393] sda sda1 [ 17.277923] sd 0 0 0 0 [sda] Attached SCSI disk Starting system log daemon syslogd, klogd. mount mounting /dev/mtdblock2 on /tmp/oldsys-preseed/rootfs failed Input/output error umount can t umount /tmp/oldsys-preseed/rootfs Invalid argument 無事にセットアップが始まりました。 続きはDebian Wheezy Install
https://w.atwiki.jp/xbox360score/pages/2261.html
Wheel of Fortune 項目数：45 総ポイント：1000 難易度：★★☆☆☆ 注意！北米版本体のみ起動可能ソフトです。日本版のXbox360本体では起動できません My First Puzzle! Solve a puzzle! 5 Showboat Perform a gesture 5 It’s a Toss Up! Win a Toss Up 5 Dress For Success Change Clothes in the Contestant Creator 5 We Have A Winner! Win your first game 5 Taking It Easy Win a game on Easy difficulty 5 Taking on the World Finish an online game 5 We Still Have A Winner! Win five games 10 A $2K Round! Win $2,000 in one round 5 We Really Have A Winner! Win 10 games 15 What Should I Pick? Look at the Used Letter Board 5 Some Wheel Competition Win an online game 10 I’d Like to Solve the Puzzle Solve the puzzle without guessing letters on your turn 15 I’ll Spin Spin the wheel five times in a row 15 A $5K Round! Win $5,000 in one round 10 The Minigame Champ! Become a Minigame Champ 10 Get Out Of There! Lose a prize wedge or tag by Bankrupt 15 I Like Minigames Play every minigame 20 Guess Again Guess five letters in a row 20 I’d Like to Buy Them All Buy every vowel during a puzzle 20 Not My Day Land on Bankrupt twice in a row 20 Wheel Pro! Win 25 games 20 A $10K Round! Win $10,000 in one round 20 A Small Fortune! Win $100,000 total 20 Everything In Its Right Place Own all props for one set 20 Toss Up Pro! Win all Toss Ups in a single game 20 Jackpot! Win a Jackpot 20 Fortune Flipped! Win $10,000 from a Mystery Wedge 20 Wheel Watcher Solve 10 Unique Puzzles 20 Ultimate Minigame Champ Win every minigame 20 A Talented Medium Win a game on Medium Difficulty 25 True Bonus Win a bonus round without guessing any letters correctly 25 A New Car! Win a vehicle! 25 Fashionista Acquire all contestant clothes and logos 25 A $25K Round! Win $25,000 in one round 30 A Growing Fortune! Win $250,000 total 30 A $35K Round! Win $35,000 in one round 35 A Hard Act to Follow Win a game on Hard Difficulty 45 What A Fortune! Win $1M total 45 A Massive Fortune! Win $500,000 total 50 On Location! Unlock all sets and their props 50 Wheel Master! Win 50 Games 50 Wheels on the Wheel Win a car by getting both ½ car tags 50 Instant Millionaire! Win the $1M Prize 55 I’ve a Good Feeling About This! Solve a puzzle with only one letter revealed 55 Wheel of Fortune Solver http //datagenetics.com/blog/january22013/index.html GameGuideFAQ Wheel of Fortune Cheat List - Puzzle Answers for PS3 Xbox 360 (もちろん全回答のほんの一部しか掲載されていない) http //gameguidefaq.blogspot.jp/2013/04/wheel-of-fortune-cheat-list-puzzle.html 特定のWedgeやTagを手に入れる、特定のマスに止めるための手段について 大体50％～55％程度の力でホイールを回すと、回す前に止まっていたマスと同じ所に止まる力加減になる。 ここを基準に弱く回したり強く回したりすることで、ある程度狙った所に止めることは可能。 1コン側で特定のWedgeなどを手に入れた後、どうしても失くしたくない場合は以降のゲーム進行を2コン側に任せ、1コン側は問題の正答を行なうのみに徹するとよい。 Showboat ゲーム中にLBやRBを押す。ソロプレイ中でもOK。 Some Wheel Competition / Taking on the World この2つのみがオンライン限定実績。 3人までの同時プレイが可能だが、1vs1(CPUも参加させない)の対戦でも実績解除は可能。 勝利すれば「Some Wheel Competition」が、勝敗問わず最後まで参加すれば「Taking on the World」が解除。 I’d Like to Solve the Puzzle 2コン側だけを使ってゲームを進め、解答がわかった段階で1コン側で正答すればよい。 Instant Millionaire! まずはゲーム中にBankruptに挟まれた狭い$1MのWedgeのマスに止め、アルファベットの推測を成功させてWedgeを手に入れる。 そして、このWedgeをボーナスラウンドに挑戦するまでずっと所持し続ける。 ボーナスラウンドの際に、賞金額を決めるホイールのどこかに賞金$1Mが配置されるので(場所はランダムな上にどこだか分からない？)、当たるように祈りつつホイールを回す。 ボーナスラウンドを正答し、賞金として見事$1,000,000を獲得できれば実績解除。
https://w.atwiki.jp/conlang_arka/pages/16.html
Detailed descriptions of basic words Arka dictionary is not just a list of words. It has fine descriptions of basic words. Let s see the description of aav (chain). aav [noun] a chain [verb] keep sth on a chain [letters] link [metaphor] linkage rd;raavyu,lsl.xik 13 raavyu (chain) from Old Arka raabyu raavyu la kolett (strings) [culture] Ordinarily aav is made of metal. Chains are used to make necklaces. Don t forget chains that show a forbidden area. [idiom] yun aav in succession [example] aav oma a nial keep a dog on a chain gil at aav soven la tianal. She dated him for money. diretan fosat yu yun aav. The criminals were arrested in succession. Here is the description of chain (derivations excluded) from Esperanto-Japanese dictionary (Esperanto-Japana Vortaro by JEI). This is the most detailed Esperanto-Japanese dictionary. This description has word meanings but does not show any examples. It only shows some collocations. The description is shorter than that of Arka dictionary. Many descriptions of Arka dictionary are more detailed than those of Esperanto-Japana Vortaro. Surprisingly, Arka dictionary was written by only one person, whereas Esperanto-Japana Vortaro was written by more than 50 people. The following is the description of galt (gate). galt [architecture] a gate [adjective] a gate of [traffic] ticket wicket of a station. There is an arch that senses anse at a ticket wicket in Arna. [noun] anything whose shape is like a capital pi of the Greek alphabet [martial arts] a posture suited for attack and defense fv;e 13 sert galt galt la gar [culture] Apartment buildings and detached houses have at least one gate. There is a garden between a house and the street. Some of Arban put an arch instead of a gate. Arban push a gate when entering. [idiom] galt e nene em hom. lose one s temper. It means "the gate of anger has opened". You don t need jo (anger) here because this idiom itself shows someone s anger. sat galt attain the posture of galt [example] galt ant emator hom. I was about to lose my temper. Here is the description of pordego (gate) from Esperanto-Japana Vortaro. You will find that Arka has unique definitions. Pordego doesn t have a definition which means a posture for martial arts. In addition, Arka s description has notes on the culture and idioms. By the way, You can find a fine description of pordo (door) in Esperanto-Japana Vortaro. The description is as long as that of omi (door in Arka) but it has many collocations. What is the longest description in Arka dictionary? It lies in dolmiyu, the theory of magic known in this world. The description of dolmiyu has more than 50,000 words (not letters) in Japanese.
https://w.atwiki.jp/scrapbooking/pages/12.html
海外のスクラップブッキングに関するBookmark 下記に無い海外ショップさんやメーカーサイトをご存じの方がいらっしゃいましたら、ここに↓↓↓書き込みお願い致します Prima Marketing Inc (2008-12-02 11 56 48) WEBSTWES PAGES (2008-12-11 20 55 03) Coredinations (2008-12-12 19 46 53) Scrap.n.crop (2008-12-30 14 33 17) Wausau Paper (2009-01-01 14 52 19) Collage Press (2009-01-05 09 44 53) Creative Imaginations (2009-01-05 17 00 40) OCtober Afternoon (2009-01-18 23 03 06) Paris Hilton (2009-01-21 13 37 52) Cosmocricket (2009-01-31 10 33 14) Paper Wizard (2009-02-01 15 31 31) Martha Stewart Crafts (2009-02-10 20 50 07) A Million Littlethings (2009-03-11 09 04 28) buzz and bloom (2009-03-13 19 03 38) Vintage Style (2009-05-01 08 42 04) The Angel Company (2009-05-03 09 22 09) oneheart...onemind (2009-05-03 09 26 15) Eyelet Outlet Brads (2009-05-03 09 29 12) Crafty Secrets (2009-05-03 09 32 19) Kaiser Craft (2009-05-04 22 28 47) My Little Shoebox (2009-05-07 15 14 33) Jillibean Soup (2009-05-07 15 44 06) Fancy Pants Designs (2009-05-08 09 15 03) Miss Fancy Pants (2009-05-08 09 16 31) Nursery Rhymes Online (2009-05-10 07 38 23) Lily Bee Design (2009-05-14 10 21 38) Jillibean Soup (2009-09-28 07 05 57) Scrap In Style (2009-11-24 09 16 57) サイト名 URL CHA(Craft and Hobby Association) CHA about.com scrapbooking http //scrapbooking.about.com/ Scrapbook.com scrapbooking-directory.com http //www.scrapbooking-directory.com/ scrapjazz.com http //www.scrapjazz.com/ le-scrapbooking (仏) http //www.le-scrapbooking.org/ scrapbooking.com.au (豪) http //www.scrapbooking.com.au/ Company EK Success http //www.eksuccess.com/ American Crafts http //www.americancrafts.com/ Autumn Leaves http //www.autumnleaves.com/ Bazzill Basics Paper http //www.bazzillbasics.com/ Scrapworks http //www.scrapworks.com/ Basicgrey http //www.basicgrey.com/ Cosmo Cricket http //www.cosmocricket.com/ We R Memory Keepers http //www.weronthenet.com/index.shtml 7gypsies http //www.sevengypsies.com/ BasicGrey http //www.basicgrey.com/ Die Cuts With A View http //www.diecutswithaview.com/index.php Making Memories http //www.makingmemories.com/ Impress http //www.impressrubberstamps.com/ Provo Craft http //www.provocraft.com/index.php sizzix http //www.sizzix.com/ Creative Imaginations http //www.creativeimaginations.us/ All My Memories http //www.allmymemories.com/ Autumn Leaves http //www.autumnleaves.com/ Deja Views http //www.dejaviews.com/ Cloud9 Design http //www.cloud9design.biz/index.htm Fancy Pants Designs http //www.fancypantsdesigns.com/ Hero Arts http //www.heroarts.com/index.cfm Heidi Swapp http //www.heidiswapp.com/index.html Urban Lily http //www.urbanlily.com/ K Company http //www.kandcompany.com/ Prism http //www.prismpapers.com/ cherryArte http //www.cherryarte.com/index.php Piggy Tales Creative Imaginations http //www.creativeimaginations.us/index.php Prima Hybrid http //www.primahybrid.com/shoppe/home.php BoBunny http //www.bobunny.com/ Melissa Frances http //www.melissafrances.com/ Hambly Screen Prints Pine Cone Press TINKERING INK http //tinkeringink.typepad.com/blog/ imaginisce Scenic Route Paper Co. My Mind's Eye Sassafras Lass その他 scrapbookingtop50 タグ bookmark homepage web 海外